 Contents | MATPOWER |
| add_userfcn | ADD_USERFCN Appends a userfcn to the list to be called for a case. |
| bustypes | BUSTYPES Builds index lists for each type of bus (REF, PV, PQ). |
| case118 | CASE118 Power flow data for IEEE 118 bus test case. |
| case14 | CASE14 Power flow data for IEEE 14 bus test case. |
| case2383wp | CASE2383WP Power flow data for Polish system - winter 1999-2000 peak. |
| case24_ieee_rts | CASE24_IEEE_RTS Power flow data for the IEEE RELIABILITY TEST SYSTEM. |
| case2736sp | CASE2736SP Power flow data for Polish system - summer 2004 peak. |
| case2737sop | CASE2737SOP Power flow data for Polish system - summer 2004 off-peak. |
| case2746wop | CASE2746WOP Power flow data for Polish system - winter 2003-04 off-peak. |
| case2746wp | CASE2746WP Power flow data for Polish system - winter 2003-04 evening peak. |
| case30 | CASE30 Power flow data for 30 bus, 6 generator case. |
| case300 | CASE300 Power flow data for IEEE 300 bus test case. |
| case3012wp | CASE3012WP Power flow data for Polish system - winter 2007-08 evening peak. |
| case30Q | CASE30Q Case 30 with costs for reactive generation. |
| case30pwl | CASE30PWL Case 30 with piece-wise linear generator costs. |
| case3120sp | CASE3120SP Power flow data for Polish system - summer 2008 morning peak. |
| case3375wp | CASE3375WP Power flow data for Polish system - winter 2007-08 evening peak. |
| case39 | CASE39 Power flow data for 39 bus New England system. |
| case4gs | CASE4GS Power flow data for 4 bus, 2 gen case from Grainger & Stevenson. |
| case5 | CASE5 Power flow data for modified 5 bus, 5 gen case based on PJM 5-bus system |
| case57 | CASE57 Power flow data for IEEE 57 bus test case. |
| case6ww | CASE6WW Power flow data for 6 bus, 3 gen case from Wood & Wollenberg. |
| case9 | CASE9 Power flow data for 9 bus, 3 generator case. |
| case9Q | CASE9Q Case 9 with costs for reactive generation. |
| case9target | CASE9TARGET Target injection power flow data for 9 bus, 3 generator case. |
| case_ieee30 | CASE_IEEE30 Power flow data for IEEE 30 bus test case. |
| case_info | CASE_INFO Prints information about islands in a network. |
| caseformat | CASEFORMAT Defines the MATPOWER case file format. |
| cdf2mpc | CDF2MPC Converts an IEEE CDF data file into a MATPOWER case struct. |
| compare_case | COMPARE_CASE Compares the bus, gen, branch matrices of 2 MATPOWER cases. |
| connected_components | CONNECTED_COMPONENTS Returns the connected components of a graph |
| cpf_corrector | CPF_CORRECTOR Solves the corrector step of a continuation power flow using a |
| cpf_default_callback | CPF_DEFAULT_CALLBACK Default callback function for CPF |
| cpf_p | CPF_P Computes the value of the CPF parameterization function. |
| cpf_p_jac | CPF_P_JAC Computes partial derivatives of CPF parameterization function. |
| cpf_predictor | CPF_PREDICTOR Performs the predictor step for the continuation power flow |
| cplex_options | CPLEX_OPTIONS Sets options for CPLEX. |
| d2AIbr_dV2 | D2AIBR_DV2 Computes 2nd derivatives of |complex current|^2 w.r.t. V. |
| d2ASbr_dV2 | D2ASBR_DV2 Computes 2nd derivatives of |complex power flow|^2 w.r.t. V. |
| d2Ibr_dV2 | D2IBR_DV2 Computes 2nd derivatives of complex branch current w.r.t. voltage. |
| d2Sbr_dV2 | D2SBR_DV2 Computes 2nd derivatives of complex power flow w.r.t. voltage. |
| d2Sbus_dV2 | D2SBUS_DV2 Computes 2nd derivatives of power injection w.r.t. voltage. |
| dAbr_dV | DABR_DV Partial derivatives of squared flow magnitudes w.r.t voltage. |
| dIbr_dV | DIBR_DV Computes partial derivatives of branch currents w.r.t. voltage. |
| dSbr_dV | DSBR_DV Computes partial derivatives of power flows w.r.t. voltage. |
| dSbus_dV | DSBUS_DV Computes partial derivatives of power injection w.r.t. voltage. |
| dcopf | DCOPF Solves a DC optimal power flow. |
| dcopf_solver | DCOPF_SOLVER Solves a DC optimal power flow. |
| dcpf | DCPF Solves a DC power flow. |
| define_constants | DEFINE_CONSTANTS Defines constants for named column indices to data matrices. |
| e2i_data | E2I_DATA Converts data from external to internal indexing. |
| e2i_field | E2I_FIELD Converts fields of MPC from external to internal indexing. |
| ext2int | EXT2INT Converts external to internal indexing. |
| extract_islands | function mpck = extract_islands(mpc, groups, k, custom) |
| fairmax | FAIRMAX Same as built-in MAX, except breaks ties randomly. |
| fdpf | FDPF Solves the power flow using a fast decoupled method. |
| find_islands | FIND_ISLANDS Finds islands in a network |
| fmincopf | FMINCOPF Solves an AC optimal power flow using FMINCON (Opt Tbx 2.x & later). |
| fmincopf_solver | FMINCOPF_SOLVER Solves AC optimal power flow using FMINCON. |
| gausspf | GAUSSPF Solves the power flow using a Gauss-Seidel method. |
| get_losses | GET_LOSSES Returns series losses (and reactive injections) per branch. |
| get_reorder | GET_REORDER Returns A with one of its dimensions indexed. |
| glpk_options | GLPK_OPTIONS Sets options for GLPK. |
| gurobi_options | GUROBI_OPTIONS Sets options for GUROBI (version 5.x and greater). |
| gurobiver | GUROBIVER Prints or returns GUROBI version info. |
| hasPQcap | HASPQCAP Checks for P-Q capability curve constraints. |
| have_fcn | HAVE_FCN Test for optional functionality. |
| i2e_data | I2E_DATA Converts data from internal to external bus numbering. |
| i2e_field | I2E_FIELD Converts fields of MPC from internal to external bus numbering. |
| idx_brch | IDX_BRCH Defines constants for named column indices to branch matrix. |
| idx_bus | IDX_BUS Defines constants for named column indices to bus matrix. |
| idx_cost | IDX_COST Defines constants for named column indices to gencost matrix. |
| idx_dcline | IDX_DCLINE Defines constants for named column indices to dcline matrix. |
| idx_gen | IDX_GEN Defines constants for named column indices to gen matrix. |
| int2ext | INT2EXT Converts internal to external bus numbering. |
| ipopt_options | IPOPT_OPTIONS Sets options for IPOPT. |
| ipoptopf_solver | IPOPTOPF_SOLVER Solves AC optimal power flow using MIPS. |
| isload | ISLOAD Checks for dispatchable loads. |
| ktropf_solver | KTROPF_SOLVER Solves AC optimal power flow using KNITRO. |
| load2disp | LOAD2DISP Converts fixed loads to dispatchable. |
| loadcase | LOADCASE Load .m or .mat case files or data struct in MATPOWER format. |
| makeAang | MAKEAANG Construct constraints for branch angle difference limits. |
| makeApq | MAKEAPQ Construct linear constraints for generator capability curves. |
| makeAvl | MAKEAVL Construct linear constraints for constant power factor var loads. |
| makeAy | MAKEAY Make the A matrix and RHS for the CCV formulation. |
| makeB | MAKEB Builds the FDPF matrices, B prime and B double prime. |
| makeBdc | MAKEBDC Builds the B matrices and phase shift injections for DC power flow. |
| makeJac | MAKEJAC Forms the power flow Jacobian. |
| makeLODF | MAKELODF Builds the line outage distribution factor matrix. |
| makePTDF | MAKEPTDF Builds the DC PTDF matrix for a given choice of slack. |
| makeSbus | MAKESBUS Builds the vector of complex bus power injections. |
| makeYbus | MAKEYBUS Builds the bus admittance matrix and branch admittance matrices. |
| margcost | MARGCOST Computes marginal cost for generators at given output level. |
| mips | MIPS MATLAB Interior Point Solver. |
| mipsopf_solver | MIPSOPF_SOLVER Solves AC optimal power flow using MIPS. |
| mipsver | MIPSVER Prints or returns MIPS version info for current installation. |
| modcost | MODCOST Modifies generator costs by shifting or scaling (F or X). |
| mosek_options | MOSEK_OPTIONS Sets options for MOSEK. |
| mpoption | MPOPTION Used to set and retrieve a MATPOWER options struct. |
| mpoption_info_cplex | MPOPTION_INFO_CPLEX Returns MATPOWER option info for CPLEX. |
| mpoption_info_fmincon | MPOPTION_INFO_FMINCON Returns MATPOWER option info for FMINCON. |
| mpoption_info_glpk | MPOPTION_INFO_GLPK Returns MATPOWER option info for GLPK. |
| mpoption_info_gurobi | MPOPTION_INFO_GUROBI Returns MATPOWER option info for Gurobi. |
| mpoption_info_ipopt | MPOPTION_INFO_IPOPT Returns MATPOWER option info for IPOPT. |
| mpoption_info_knitro | MPOPTION_INFO_KNITRO Returns MATPOWER option info for KNITRO. |
| mpoption_info_linprog | MPOPTION_INFO_LINPROG Returns MATPOWER option info for LINPROG. |
| mpoption_info_mips | MPOPTION_INFO_MIPS Returns MATPOWER option info for MIPS (optional fields). |
| mpoption_info_mosek | MPOPTION_INFO_MOSEK Returns MATPOWER option info for MOSEK. |
| mpoption_info_quadprog | MPOPTION_INFO_QUADPROG Returns MATPOWER option info for QUADPROG. |
| mpoption_old | MPOPTION_OLD Used to set and retrieve old-style MATPOWER options vector. |
| mpver | MPVER Prints or returns MATPOWER version info for current installation. |
| nested_struct_copy | NESTED_STRUCT_COPY Copies values from one nested struct to another. |
| newtonpf | NEWTONPF Solves the power flow using a full Newton's method. |
| opf | OPF Solves an optimal power flow. |
| opf_args | OPF_ARGS Parses and initializes OPF input arguments. |
| opf_consfcn | OPF_CONSFCN Evaluates nonlinear constraints and their Jacobian for OPF. |
| opf_costfcn | OPF_COSTFCN Evaluates objective function, gradient and Hessian for OPF. |
| opf_execute | OPF_EXECUTE Executes the OPF specified by an OPF model object. |
| opf_hessfcn | OPF_HESSFCN Evaluates Hessian of Lagrangian for AC OPF. |
| opf_setup | OPF Constructs an OPF model object from a MATPOWER case struct. |
| pfsoln | PFSOLN Updates bus, gen, branch data structures to match power flow soln. |
| poly2pwl | POLY2PWL Converts polynomial cost variable to piecewise linear. |
| polycost | POLYCOST Evaluates polynomial generator cost & derivatives. |
| pqcost | PQCOST Splits the gencost variable into two pieces if costs are given for Qg. |
| printpf | PRINTPF Prints power flow results. |
| psse2mpc | PSSE2MPC Converts a PSS/E RAW data file into a MATPOWER case struct. |
| psse_convert | PSSE_CONVERT Converts data read from PSS/E RAW file to MATPOWER case. |
| psse_convert_hvdc | PSSE_CONVERT_HVDC Convert HVDC data from PSS/E RAW to MATPOWER |
| psse_convert_xfmr | PSSE_CONVERT_XFMR Convert transformer data from PSS/E RAW to MATPOWER |
| psse_parse | PSSE_PARSE Parses the data from a PSS/E RAW data file. |
| psse_parse_line | PSSE_PARSE_LINE Reads and parses a single line from a PSS/E RAW data file |
| psse_parse_section | PSSE_PARSE_SECTION Parses the data from a section of a PSS/E RAW data file |
| psse_read | PSSE_READ Reads the data from a PSS/E RAW data file. |
| qps_bpmpd | QPS_BPMPD Quadratic Program Solver based on BPMPD_MEX. |
| qps_cplex | QPS_CPLEX Quadratic Program Solver based on CPLEX. |
| qps_glpk | QPS_GLPK Quadratic Program Solver based on QUADPROG/LINPROG. |
| qps_gurobi | QPS_GUROBI Quadratic Program Solver based on GUROBI. |
| qps_ipopt | QPS_IPOPT Quadratic Program Solver based on IPOPT. |
| qps_matpower | QPS_MATPOWER Quadratic Program Solver for MATPOWER. |
| qps_mips | QPS_MIPS Quadratic Program Solver based on MIPS. |
| qps_mosek | QPS_MOSEK Quadratic Program Solver based on MOSEK. |
| qps_ot | QPS_OT Quadratic Program Solver based on QUADPROG/LINPROG. |
| remove_userfcn | REMOVE_USERFCN Removes a userfcn from the list to be called for a case. |
| run_userfcn | RUN_USERFCN Runs the userfcn callbacks for a given stage. |
| runcpf | RUNCPF Runs a full AC continuation power flow |
| rundcopf | RUNDCOPF Runs a DC optimal power flow. |
| rundcpf | RUNDCPF Runs a DC power flow. |
| runduopf | RUNDUOPF Runs a DC optimal power flow with unit-decommitment heuristic. |
| runopf | RUNOPF Runs an optimal power flow. |
| runopf_w_res | RUNOPF_W_RES Runs an optimal power flow with fixed zonal reserves. |
| runpf | RUNPF Runs a power flow. |
| runuopf | RUNUOPF Runs an optimal power flow with unit-decommitment heuristic. |
| savecase | SAVECASE Saves a MATPOWER case file, given a filename and the data. |
| scale_load | SCALE_LOAD Scales fixed and/or dispatchable loads. |
| set_reorder | SET_REORDER Assigns B to A with one of the dimensions of A indexed. |
| toggle_dcline | TOGGLE_DCLINE Enable, disable or check status of DC line modeling. |
| toggle_iflims | TOGGLE_IFLIMS Enable, disable or check status of set of interface flow limits. |
| toggle_reserves | TOGGLE_RESERVES Enable, disable or check status of fixed reserve requirements. |
| toggle_softlims | TOGGLE_SOFTLIMS Relax DC optimal power flow branch limits. |
| total_load | TOTAL_LOAD Returns vector of total load in each load zone. |
| totcost | TOTCOST Computes total cost for generators at given output level. |
| uopf | UOPF Solves combined unit decommitment / optimal power flow. |
| update_mupq | UPDATE_MUPQ Updates values of generator limit shadow prices. |
Master index