EX_CASE3A Three bus example system. Please see CASEFORMAT for details on the case file format.
0001 function mpc = ex_case3a 0002 %EX_CASE3A Three bus example system. 0003 % Please see CASEFORMAT for details on the case file format. 0004 0005 % MOST 0006 % Copyright (c) 2015-2016, Power Systems Engineering Research Center (PSERC) 0007 % by Ray Zimmerman, PSERC Cornell 0008 % 0009 % This file is part of MOST. 0010 % Covered by the 3-clause BSD License (see LICENSE file for details). 0011 % See http://www.pserc.cornell.edu/matpower/ for more info. 0012 0013 %% MATPOWER Case Format : Version 2 0014 mpc.version = '2'; 0015 0016 %%----- Power Flow Data -----%% 0017 %% system MVA base 0018 mpc.baseMVA = 100; 0019 0020 %% bus data 0021 % bus_i type Pd Qd Gs Bs area Vm Va baseKV zone Vmax Vmin 0022 mpc.bus = [ 0023 1 3 0 0 0 0 1 1 0 135 1 1.05 0.95; 0024 2 2 0 0 0 0 1 1 0 135 1 1.05 0.95; 0025 3 2 0 0 0 0 1 1 0 135 1 1.05 0.95; 0026 ]; 0027 0028 %% generator data 0029 % bus Pg Qg Qmax Qmin Vg mBase status Pmax Pmin Pc1 Pc2 Qc1min Qc1max Qc2min Qc2max ramp_agc ramp_10 ramp_30 ramp_q apf 0030 mpc.gen = [ 0031 1 125 0 25 -25 1 100 1 200 0 0 0 0 0 0 0 0 250 250 0 0; 0032 1 125 0 25 -25 1 100 1 200 0 0 0 0 0 0 0 0 250 250 0 0; 0033 2 200 0 50 -50 1 100 1 500 0 0 0 0 0 0 0 0 600 600 0 0; 0034 3 -450 0 0 0 1 100 1 0 -450 0 0 0 0 0 0 0 500 500 0 0; 0035 ]; 0036 0037 %% branch data 0038 % fbus tbus r x b rateA rateB rateC ratio angle status angmin angmax 0039 mpc.branch = [ 0040 1 2 0.005 0.01 0 300 300 300 0 0 1 -360 360; 0041 1 3 0.005 0.01 0 240 240 240 0 0 1 -360 360; 0042 2 3 0.005 0.01 0 300 300 300 0 0 1 -360 360; 0043 ]; 0044 0045 %%----- OPF Data -----%% 0046 %% generator cost data 0047 % 1 startup shutdown n x1 y1 ... xn yn 0048 % 2 startup shutdown n c(n-1) ... c0 0049 mpc.gencost = [ 0050 2 0 0 3 0.1 0 0; 0051 2 0 0 3 0.1 0 0; 0052 2 0 0 3 0.1 0 0; 0053 2 0 0 3 0 1000 0; 0054 ]; 0055 0056 %%----- Reserve Data -----%% 0057 %% reserve zones, element i, j is 1 if gen j is in zone i, 0 otherwise 0058 mpc.reserves.zones = [ 0059 1 1 1 0; 0060 ]; 0061 0062 %% reserve requirements for each zone in MW 0063 mpc.reserves.req = 150; 0064 0065 %% reserve costs in $/MW for each gen that belongs to at least 1 zone 0066 %% (same order as gens, but skipping any gen that does not belong to any zone) 0067 % mpc.reserves.cost = [ 5; 5; 21; ]; 0068 % mpc.reserves.cost = [ 5; 5; 16.25; ]; 0069 % mpc.reserves.cost = [ 0; 0; 11.25; ]; 0070 mpc.reserves.cost = [ 1; 3; 5; ]; 0071 0072 %% OPTIONAL max reserve quantities for each gen that belongs to at least 1 zone 0073 %% (same order as gens, but skipping any gen that does not belong to any zone) 0074 mpc.reserves.qty = [ 100; 100; 200; ];