CASE14 Power flow data for IEEE 14 bus test case.
Please see CASEFORMAT for details on the case file format.
This data was converted from IEEE Common Data Format
(ieee14cdf.txt) on 20-Sep-2004 by cdf2matp, rev. 1.11
See end of file for warnings generated during conversion.
Converted from IEEE CDF file from:
http://www.ee.washington.edu/research/pstca/
08/19/93 UW ARCHIVE 100.0 1962 W IEEE 14 Bus Test Case0001 function mpc = case14 0002 %CASE14 Power flow data for IEEE 14 bus test case. 0003 % Please see CASEFORMAT for details on the case file format. 0004 % This data was converted from IEEE Common Data Format 0005 % (ieee14cdf.txt) on 20-Sep-2004 by cdf2matp, rev. 1.11 0006 % See end of file for warnings generated during conversion. 0007 % 0008 % Converted from IEEE CDF file from: 0009 % http://www.ee.washington.edu/research/pstca/ 0010 % 0011 % 08/19/93 UW ARCHIVE 100.0 1962 W IEEE 14 Bus Test Case 0012 0013 % MATPOWER 0014 % $Id: case14.m,v 1.11 2010/03/10 18:08:15 ray Exp $ 0015 0016 %% MATPOWER Case Format : Version 2 0017 mpc.version = '2'; 0018 0019 %%----- Power Flow Data -----%% 0020 %% system MVA base 0021 mpc.baseMVA = 100; 0022 0023 %% bus data 0024 % bus_i type Pd Qd Gs Bs area Vm Va baseKV zone Vmax Vmin 0025 mpc.bus = [ 0026 1 3 0 0 0 0 1 1.06 0 0 1 1.06 0.94; 0027 2 2 21.7 12.7 0 0 1 1.045 -4.98 0 1 1.06 0.94; 0028 3 2 94.2 19 0 0 1 1.01 -12.72 0 1 1.06 0.94; 0029 4 1 47.8 -3.9 0 0 1 1.019 -10.33 0 1 1.06 0.94; 0030 5 1 7.6 1.6 0 0 1 1.02 -8.78 0 1 1.06 0.94; 0031 6 2 11.2 7.5 0 0 1 1.07 -14.22 0 1 1.06 0.94; 0032 7 1 0 0 0 0 1 1.062 -13.37 0 1 1.06 0.94; 0033 8 2 0 0 0 0 1 1.09 -13.36 0 1 1.06 0.94; 0034 9 1 29.5 16.6 0 19 1 1.056 -14.94 0 1 1.06 0.94; 0035 10 1 9 5.8 0 0 1 1.051 -15.1 0 1 1.06 0.94; 0036 11 1 3.5 1.8 0 0 1 1.057 -14.79 0 1 1.06 0.94; 0037 12 1 6.1 1.6 0 0 1 1.055 -15.07 0 1 1.06 0.94; 0038 13 1 13.5 5.8 0 0 1 1.05 -15.16 0 1 1.06 0.94; 0039 14 1 14.9 5 0 0 1 1.036 -16.04 0 1 1.06 0.94; 0040 ]; 0041 0042 %% generator data 0043 % bus Pg Qg Qmax Qmin Vg mBase status Pmax Pmin Pc1 Pc2 Qc1min Qc1max Qc2min Qc2max ramp_agc ramp_10 ramp_30 ramp_q apf 0044 mpc.gen = [ 0045 1 232.4 -16.9 10 0 1.06 100 1 332.4 0 0 0 0 0 0 0 0 0 0 0 0; 0046 2 40 42.4 50 -40 1.045 100 1 140 0 0 0 0 0 0 0 0 0 0 0 0; 0047 3 0 23.4 40 0 1.01 100 1 100 0 0 0 0 0 0 0 0 0 0 0 0; 0048 6 0 12.2 24 -6 1.07 100 1 100 0 0 0 0 0 0 0 0 0 0 0 0; 0049 8 0 17.4 24 -6 1.09 100 1 100 0 0 0 0 0 0 0 0 0 0 0 0; 0050 ]; 0051 0052 %% branch data 0053 % fbus tbus r x b rateA rateB rateC ratio angle status angmin angmax 0054 mpc.branch = [ 0055 1 2 0.01938 0.05917 0.0528 9900 0 0 0 0 1 -360 360; 0056 1 5 0.05403 0.22304 0.0492 9900 0 0 0 0 1 -360 360; 0057 2 3 0.04699 0.19797 0.0438 9900 0 0 0 0 1 -360 360; 0058 2 4 0.05811 0.17632 0.034 9900 0 0 0 0 1 -360 360; 0059 2 5 0.05695 0.17388 0.0346 9900 0 0 0 0 1 -360 360; 0060 3 4 0.06701 0.17103 0.0128 9900 0 0 0 0 1 -360 360; 0061 4 5 0.01335 0.04211 0 9900 0 0 0 0 1 -360 360; 0062 4 7 0 0.20912 0 9900 0 0 0.978 0 1 -360 360; 0063 4 9 0 0.55618 0 9900 0 0 0.969 0 1 -360 360; 0064 5 6 0 0.25202 0 9900 0 0 0.932 0 1 -360 360; 0065 6 11 0.09498 0.1989 0 9900 0 0 0 0 1 -360 360; 0066 6 12 0.12291 0.25581 0 9900 0 0 0 0 1 -360 360; 0067 6 13 0.06615 0.13027 0 9900 0 0 0 0 1 -360 360; 0068 7 8 0 0.17615 0 9900 0 0 0 0 1 -360 360; 0069 7 9 0 0.11001 0 9900 0 0 0 0 1 -360 360; 0070 9 10 0.03181 0.0845 0 9900 0 0 0 0 1 -360 360; 0071 9 14 0.12711 0.27038 0 9900 0 0 0 0 1 -360 360; 0072 10 11 0.08205 0.19207 0 9900 0 0 0 0 1 -360 360; 0073 12 13 0.22092 0.19988 0 9900 0 0 0 0 1 -360 360; 0074 13 14 0.17093 0.34802 0 9900 0 0 0 0 1 -360 360; 0075 ]; 0076 0077 %%----- OPF Data -----%% 0078 %% generator cost data 0079 % 1 startup shutdown n x1 y1 ... xn yn 0080 % 2 startup shutdown n c(n-1) ... c0 0081 mpc.gencost = [ 0082 2 0 0 3 0.0430293 20 0; 0083 2 0 0 3 0.25 20 0; 0084 2 0 0 3 0.01 40 0; 0085 2 0 0 3 0.01 40 0; 0086 2 0 0 3 0.01 40 0; 0087 ]; 0088 0089 % Warnings from cdf2matp conversion: 0090 % 0091 % ***** Qmax = Qmin at generator at bus 1 (Qmax set to Qmin + 10) 0092 % ***** area data conversion not yet implemented (creating dummy area data) 0093 % ***** MVA limit of branch 1 - 2 not given, set to 9900 0094 % ***** MVA limit of branch 1 - 5 not given, set to 9900 0095 % ***** MVA limit of branch 2 - 3 not given, set to 9900 0096 % ***** MVA limit of branch 2 - 4 not given, set to 9900 0097 % ***** MVA limit of branch 2 - 5 not given, set to 9900 0098 % ***** MVA limit of branch 3 - 4 not given, set to 9900 0099 % ***** MVA limit of branch 4 - 5 not given, set to 9900 0100 % ***** MVA limit of branch 4 - 7 not given, set to 9900 0101 % ***** MVA limit of branch 4 - 9 not given, set to 9900 0102 % ***** MVA limit of branch 5 - 6 not given, set to 9900 0103 % ***** MVA limit of branch 6 - 11 not given, set to 9900 0104 % ***** MVA limit of branch 6 - 12 not given, set to 9900 0105 % ***** MVA limit of branch 6 - 13 not given, set to 9900 0106 % ***** MVA limit of branch 7 - 8 not given, set to 9900 0107 % ***** MVA limit of branch 7 - 9 not given, set to 9900 0108 % ***** MVA limit of branch 9 - 10 not given, set to 9900 0109 % ***** MVA limit of branch 9 - 14 not given, set to 9900 0110 % ***** MVA limit of branch 10 - 11 not given, set to 9900 0111 % ***** MVA limit of branch 12 - 13 not given, set to 9900 0112 % ***** MVA limit of branch 13 - 14 not given, set to 9900